OBD P1614 MERCEDES BENZ

26.01.2025

Enter the error code and car brand

Vehicle engine and/or automatic transmission

Code: P1614 - IFI Control module (N3/7) voltage - or - Fuel metering actuator (Y23/1k1) - or - Fuel rack position sensor (Y23/1/1)

If your Mercedes-Benz won’t start or is acting up, and you pull a P1614 error code from the scanner, you’ve got a fuel system issue on your hands. This code is linked to the IFI control module, the fuel metering actuator, or the fuel rack position sensor. In simple terms, your engine isn’t getting the right amount of fuel, which can cause starting problems, rough running, or even a complete shutdown.

This is a common issue in diesel Mercedes models like the E-Class (W211, W212), C-Class (W203, W204), and Sprinter vans, where fuel injection is tightly controlled by electronics. When something in that system fails, the engine can struggle or refuse to run properly.

What Causes the P1614 Code?

There are a few possible reasons behind this error:

Faulty IFI control module – the system isn’t managing fuel delivery correctly.
Bad fuel metering actuator – fuel flow may be erratic or stop completely.
Defective fuel rack position sensor – incorrect readings mess up fuel injection timing.
Wiring issues – corroded, damaged, or loose wires can cause signal problems.
Weak battery – low voltage can mess with the electronic fuel system.

Symptoms of the C1614 Code

If you’re driving a C200 CDI, E220 CDI, or Sprinter 313 CDI, and this code pops up, watch out for these signs:

The engine cranks but won’t start.
Power loss and sluggish acceleration.
Higher-than-normal fuel consumption.
Rough idling or stalling.
The Check Engine light is on.

How Serious Is It?

This is not a minor issue—if fuel delivery is off, your engine could stall while driving, which is dangerous. Ignoring it can also lead to bigger, more expensive repairs later.

How to Fix the P1614 Code

Check the battery – weak voltage can throw the system off.
Inspect wiring and connections – look for loose, damaged, or corroded wires.
Test the fuel metering actuator – if it’s failing, replacement is needed.
Check the fuel rack position sensor – faulty readings can cause fuel mismanagement.
Clear the code and test drive – if the issue is resolved, the code won’t return.

Conclusion

The P1614 error in Mercedes E-Class, C-Class, and Sprinter models means something is off with fuel delivery, and waiting to fix it is a bad idea. If your car is slow to start, running rough, or losing power, you’ll want to diagnose the issue ASAP. Some fixes, like checking the battery or cleaning up wiring, are simple. But if the problem is in the fuel control system, you might need a professional to sort it out.

Video for "Error p1614" on YouTube

The following error codes are often searched for

Comments on the article

Solution for error code p1614 Mercedes Benz in dtc-errors.com

Error Codes OBD 2 can be useful for diagnostics of issues with the automobile. If you face with a error code p1614 in Mercedes Benz, it is crucial to comprehend that it provides information about possible defects in the systems of your automobile. The error code p1614 for Mercedes Benz may indicate complications. This error is found in the following models of this manufacturer: Mercedes Benz.

p1614 Mercedes Benz diagnosis in a workshop

To determine and correct with greater precision the cause of the DTC in Mercedes Benz, it is suggested to consult professionals at an automotive workshop. Qualified technicians have the expertise and tools necessary to carry out a detailed analysis and the corresponding repair, which will help avoid further damage to your car. Do not ignore code p1614 in Mercedes Benz, as it warns about a possible issue that could impact the performance and safety of your vehicle. Seeking help promptly will allow maintain your car in good working condition and prolong its lifespan.